Nortel Networks 6.1 - Manual (Page 73)

P0603544 02 Compact ICS 6.1 System Coordinator Guide
Making calls
There are many ways to make a call, depending on the programming and
the type of call, as follows:
• Pick up the handset and dial. The Norstar system supports three
methods of dialing. See ‘‘Changing how you dial your calls’’ on page
77.
• Pick up the handset, press a line button, and dial, if the call is not on
your prime line.
• Press the button labeled handsfree/mute and dial to talk without using
the handset. See ‘‘Using handsfree/mute’’ on page 65.
• Press the handsfree button, press a line button, and dial to talk without
the handset and if the call is not on your prime line.
• Press a line button and dial to talk without the handset and if automatic
handsfree is assigned to your telephone.
• Use one of the features that make dialing easier. See ‘‘Storing a
number on a memory button for Autodial’’ on page 97.
Displays
The telephone you have called has no internal
lines available. Press
LATER to use the Ring
Again or Message features or press PRIORITY to
make a priority call.
You are dialing using Pre-Dial. To erase an
incorrect digit, press the left end of
Ã
or BKSP . When the number is complete, select a
line or lift the handset.
This prompt remains on your display as long as
you are on a call you have dialed. To transfer the
call, press
TRANSFER .
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
21 busy
PRIORITY LATER
9__
QUIT
BKSP
95551234
TRANSFER
Already joined