Nortel Networks 6.1 - Manual (Page 214)

214 / ISDN
Compact ICS 6.1 System Coordinator Guide P0603544 02
Calling the number your calls are forwarded to
1. Select an ISDN line by selecting a line button, a line pool, or the
handsfree button, or by lifting the handset (if an ISDN line is your
prime line).
2. Consult your service provider for the appropriate feature code to enter
on your dialpad.
Automatic Call Back
If you call a number that is busy, enter the feature code designated by your
service provider to receive a distinctive ring at your set when the line
becomes available for calls.
Automatic Recall
Automatic Recall allows you to automatically dial the number of the last
call you received. You may not see the number on the display if the
information is not available from your service provider, or you do not have
Caller ID as part of your ISDN service.
Consult your service provider for the appropriate feature code to enter on
your dialpad.
MCID (profile 2)
The MCID feature allows you to use
²¡áà to have call
information recorded on the central office system for an incoming call on
a specific line (EUROISDN lines, only).
The user must invoke the feature code either during the active call or within
within 30 seconds (time varies on different networks) after the caller hangs
up, but before the user hangs up.