Nortel Networks 6.1 - Manual (Page 74)

74 / Making calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Wait for the telephone to be answered. If no one
answers, press
LATER to use the Ring Again
(page 80) or Message (page 132) feature, or
press
PRIORITY to make a priority call.
You cannot use Ring Again on your current call.
You can only use Ring Again while you have a
busy signal on an internal call or line pool
request or while an internal call is ringing.
The telephone you are calling has Do Not
Disturb turned on. Press
LATER to use the Ring
Again or Messages features, or press PRIORITY
to make a priority call.
You have dialed a number, but the least
expensive route that the system is programmed
to use is busy. Unless you release the call, it
goes through on a more expensive route.
The last number you dialed or the number you
saved for Saved Number Redial was a speed
dial number that displayed a name rather than
the number. The number is dialed correctly, but
you cannot see it.
You have attempted to use someone else's
private line.
Enter the digits of the number you want to dial.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Either you have no prime line or your prime line
is busy. Select a line manually before dialing.
You have entered the number of a telephone that
is not in service.
The telephone you have called is on another call.
Press
LATER to use the Ring Again or Message
features.
The call you are trying to make has been
restricted in programming. A possible reason is
time-of-day restrictions on certain calls.
Calling 21
PRIORITY LATER
Can't ring again
Do not disturb
PRIORITY LATER
Expensive route
Hidden number
Line denied
Line001
TRANSFER
No last number
No line selected
Not in service
On another call
LATER
Restricted call