Nortel Networks 6.1 - Manual (Page 189)

Using the Hospitality features / 189
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Setting the room condition
You can use this feature on a room set or administration set to:
• set the room state to service done (Srvc done)
• set the room state to Needs service (Needs srvc)
• query the state of the room
Using the room set
1. Press
²¡àß on a digital set
or ˚
¥¡àß on an analog set.
2. At the prompt, set the status of the room.
Note: You may be required to enter a Room condition password.
Press
Ú to indicate Set to srv done.
Press
Û to indicate Set to needs srv.
The set displays the selected prompt.
3. Press
¨ to exit.
Using the admin set
1. Press
²¡à¡.
2. Enter the Desk admin password if you are prompted for a password.
The set displays: Cd of rm#:
3. Enter the room number and press OK.
The set displays rrrrr:Vacant.
4. To update the condition, press CHANGE and select the required status.
To query the condition of other rooms, press the FIND or NEXT displays
keys.
5. Press
¨ to exit.