Nortel Networks 6.1 - Manual (Page 77)

Making calls / 77
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Making calls from an ISDN terminal
ISDN terminals do not have line keys or intercom keys as do Norstar and
BST telephones. To make an outgoing call from an ISDN terminal, access
an external line by entering a line pool code or by using the ARS feature.
Changing how you dial your calls
1. Press
²¥¡Û
.
2. Press
£
or NEXT until the dialing mode you want appears.
3. Press
³
or OK to select the displayed dialing mode.
The dialing modes feature code cannot be programmed onto a memory
button.
Using Standard Dial
Standard Dial allows you to make a call by selecting a line and dialing the
number. If you have a prime line, it is selected automatically when you lift
the handset or press the handsfree button.
You cannot use Standard Dial on an M7100 or T7100 telephone unless you
pick up the handset first. If you are using either of these telephones, use the
Automatic Dial or Pre-dial feature for on-hook dialing.
Using Automatic Dial
Automatic Dial allows you to dial a number without selecting a line. Your
prime line is selected as soon as you start dialing a number.
Automatic Dial does not work if your telephone has no prime line or if your
prime line is in use.
Telephones connected to an analog terminal adapter (ATA) cannot use
Automatic Dial.