Nortel Networks 6.1 - Manual (Page 96)

96 / Auto Attendant
Compact ICS 6.1 System Coordinator Guide P0603544 02
Programming or changing CCR
destinations
1. Press
²
•°‹‹ and enter the System Coordinator password
(the default password is ¤‹fl›fl).
2. Press NEXT until the display shows CCR tree. The choices are SHOW,
EXIT, and PREV.
3. Press ≠. The display shows Dial 0: and the current
destination when the caller presses zero. Your choices are CHNGE and
NEXT.
4. Press CHNGE to select the appropriate destination.
Each number from zero to nine and
¥ can direct a call to the attendant
telephone or one of the nine CCR groups. The
¥ can be set up to make
the system play the CCR greeting again (Repeat). If a digit is set to None,
it has no destination.
Using NEXT and CHNGE, select the destinations for the remaining digits.
Testing your custom System Answer and CCR
If you have more than one external line, you can call in to hear your
greetings by dialing the number used by external callers to call the
attendant set or a line that is answered using CCR.
To call systems with only one external line, you must go to a telephone that
is not connected to your system.