Nortel Networks 6.1 - Manual (Page 32)

32 / Frequently used programming operations
Compact ICS 6.1 System Coordinator Guide P0603544 02
Choose a speed dial code
Add or change the telephone number
Select a line for the speed dial code
Press ‘ three times.
Press ≠ .
Press ââÚ .
You can pick any system speed dial code between 0 01 and 255.
Press ≠ .
Press CHANGE .
Use the dialpad to program the telephone number
that you want to add. The telephone number can
be up to 24 digits long.
Your display shows the telephone number, and
not n’s as shown here. Press
OK .
Press ‘ .
Press CHANGE to see your options: Use prime
line , a specific line (for example Use line: 01 ),
a line pool (for example Pool code:71 ), or Use
routing tbl .
Stop pressing CHANGE when the display shows the prime line again.
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 001.
Terminals&Setsˆ
Sys Speed Dialˆ
Speed dial #:___
LIST
Speed dial #:001ˆ
FIND
001:No number
CHANGE
001:___
CANCLOK
001:nnnnnnnn__
CANCLBKSP
OK
001:nnnnnnnn
CLR
CHANGE
Use prime line
CHANGE
Use prime line
CHANGE