Set ad synchronization time, Ad configuration—upgrade from cc-sg 3.0.2, Figure 103 synchronization of all ad modules – Raritan Computer CC-SG User Manual
Page 123
C
HAPTER
9:
C
ONFIGURING
R
EMOTE
A
UTHENTICATION
109
8. To exit Maintenance Mode, on the System Maintenance menu, click Maintenance Mode,
and then click Exit Maintenance Mode.
9. In the screen that appears, click OK. A second confirmation message will display when CC-
SG exits maintenance mode. Click OK.
Set AD Synchronization Time
By default, CC-SG will synchronize all configured AD modules at 23:30 each day. You can
change the time at which this automatic synchronization occurs.
1. On the Administration menu, click Security.
2. In the AD Synchronization Time field at the bottom of the screen, click the up and down
arrows to select the time at which you want CC-SG to perform the daily synchronization of
all AD modules.
Figure 103 Synchronization of All AD Modules
3. Click Update Synchronization Time to save your changes.
AD Configuration—Upgrade from CC-SG 3.0.2
If you have upgraded CC-SG from 3.0.2 to 3.1, you must reconfigure your AD modules before
any of your AD users can login to CC-SG. CC-SG 3.1 requires a DNS and Domain Name to be
specified for each AD module. This configuration allows CC-SG to query all domain controllers
for a given domain.
Important: CC-SG will still be in Maintenance Mode after upgrading to 3.1.
Therefore, you must login with the CC Super-User account to perform this
action. The default CC Super-User account for systems upgrading from 3.0.2 is
ccroot/raritan0.
To reconfigure AD modules:
1. On the Administration menu, click Security.
2. Select the AD module you want edit, and then click Edit.
3. In the General tab, type the DNS and Domain Name for the AD module in the corresponding
fields. Please refer to
for additional information.
4. Click Test Connection to test the connection to the AD server using the given parameters.
You should receive a confirmation of a successful connection. If you do not see a
confirmation, review the settings carefully for errors and try again.
5. Click OK to save your changes.
6. If you want to configure Advanced settings, Group settings, or Trust settings, click the
corresponding tab to view options. Please refer to the previous sections on
,
for additional information. Click OK
to save your changes in these tabs.
7. Repeat these steps to reconfigure all AD modules.
8. Once you have reconfigured all AD modules, you can synchronize your imported AD user
groups with the AD servers. Please refer to
for additional
information.