Raritan Computer CC-SG - Manual (Page 200)

186 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
SSH Commands
The following table describes all commands available in SSH. You must be assigned the
appropriate privileges in CC-SG to access each command.
C OMMAND
D ESCRIPTION
activeports
List active ports.
activeusers
List active users.
backup device <[-host <host>] | [-id <device_id>]> backup_name [description]
Backup device configuration.
clear
Clear screen.
connect [-d <device_name>] [-e <escape_char>] <[-i <interface_id>] | [-n
<port_name>] | [port_id]>
Establish a connection to a serial port. If <port_name> or <device_name> contains spaces it
should be surrounded by quotes.
copydevice <[-b <backup_id>] | [source_device_host]> target_device_host
Copy device configuration
disconnect <[-u <username>] [-p <port_id>] [-id <connection_id>]>
Close port connection.
entermaint minutes [message]
Place CC-SG in maintenance mode.
exitmaint
Remove CommandCenter from maintenance mode.
grep search_term
Search text from piped output stream.
help
View help screen.
listbackups <[-id <device_id>] | [host]>
List available device configuration backups.
listdevices
List available devices.
listfirmwares [[-id <device_id>] | [host]]
List firmware versions available for upgrade.
listinterfaces [-id <node_id>]
List all interfaces.
listnodes
List all nodes.
listports [[-id <device_id>] | [host]]
List all ports.
logoff [-u <username>] message
Logoff user
ls
List commands