Raritan Computer CC-SG - Manual (Page 59)

C HAPTER 5: A DDING D EVICES AND D EVICE G ROUPS 45
5. Type a node name in the Node Name field to create a new node with an Out-of-Band
interface from this port. For ease of use, name the node after the target that is connected to
the port. This means that you will type the same name in the Port name and Node Name
fields.
6. Click the Access Application drop-down menu and select the application you want to use
when you connect to this port from the list. To allow CC-SG to automatically select the
correct application based on your browser, select Auto-Detect.
7. Click OK to add the port.
Edit Ports
You can edit ports to change the name or access application associated with existing configured
ports.
1. Click the Devices tab and select a port you want to edit. The Port Profile screen appears.
Figure 41 Ports Profile
2. Type a new name for the port in the Port Name field, if necessary.
3. Click the Access Application drop-down menu and select the application you want to use
when you connect to this port from the list. To allow CC-SG to automatically select the
correct application based on your browser, select Auto-Detect.
4. Click OK to save changes to the configured port.