Raritan Computer CC-SG - Manual (Page 88)

74 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
5. You cannot change the type of the existing interface. You can change the Interface Name,
Description, and the values of the other fields for this type. Please refer to the Add Interface
section above for additional information.
Delete an Interface
To delete an interface from a node:
1. Click the Nodes tab.
2. Click the node with the interface you want to delete. The Node Profile screen appears.
3. In the Interfaces table, click the row of interface you want to delete.
4. Click Delete. You will be prompted to confirm your decision.
5. Click Yes to delete the interface.
Ping a Node
You can ping a node from CC-SG to make sure that the connection is active.
1. Click the Nodes tab, and then select the node you want to ping.
2. On the Nodes menu, select Ping Node. The ping results appear in the screen.
Edit a Node
Existing nodes appear in the Nodes tab and can be edited. To edit a node:
1. Click the Nodes tab, and then select the node you want to edit. The Node Profile screen
appears.
Figure 72 Edit Node Screen
2. If you want, type a new name for the node in the Node Name field. All node names in CC-
SG must be unique.
3. Optionally, type a new short description for this node under the Description field.
4. Click Add in the Interfaces area to add a new interface. Please refer to the Add Interface
section above for additional information on this procedure.