Raritan Computer CC-SG - Manual (Page 84)

70 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
For Out-of-Band KVM, Out-of-Band Serial connections:
Figure 67 Configuring an Out-of-Band KVM Connection
1. Click the Application name drop-down menu and select the application you want to use to
connect to the node with the interface from the list. To allow CC-SG to automatically select
the application based on your browser, select Auto-Detect.
2. Click the Raritan Device Name drop-down menu and select the Raritan device providing
access to this node. Note, a device must be added to CC-SG first before appearing in this list.
3. Click the Raritan Port Name drop-down menu and select the port on the Raritan device
providing access to this node. The port must be configured in CC-SG before it will appear in
this list. On serial connections the Baud Rate, Parity and Flow Control values will populate
based on the port’s configuration.
4. Click OK add the interface to the node. You will be returned to the Add Node or Node
Profile screen.