Raritan Computer CC-SG - Manual (Page 201)

C HAPTER 12: A DVANCED A DMINISTRATION 187
more [-p <page_size>]
Make paging
pingdevice <[-id <device_id>] | [host]>
Ping device
restartcc minutes [message]
Restart CC-SG
restartdevice <[-id <device_id>] | [host]>
Restart device
restoredevice <[-host <host>] | [-id <device_id>]> [backup_id]
Restore device configuration
shutdowncc minutes [message]
Shutdown CC-SG.
ssh [-e <escape_char>] <[-id <device_id>] | [host]>
Open SSH connection to an SX device
su [-u <user_name>]
Change a user.
upgradedevice <[-id <device_id>] | [host]>
Upgrade device firmware
exit
Exit SSH session.
Typing the command followed by the
–h switch displays help for that command, such as
listfirmwares –h.
Command Tips
The following describes several nuances of the SSH commands:
• For commands that pass an IP address, such as upgradedevice, you can substitute the
hostname for an IP address. For hostname rules, please refer to Terminology/Acronyms in
Chapter 1: Introduction.
• The copydevice and restartdevice commands apply only to some Raritan devices, for example,
Dominion SX. IPMI servers, generic devices are not supported by these commands.