Raritan Computer CC-SG - Manual (Page 37)

C HAPTER 3: C ONFIGURING CC-SG WITH G UIDED S ETUP 23
7. In the All Policies list, select the Policy that you want to assign to the user group then click
Add to move the Policy to the Selected Policies list. Policies in the Selected Policies list will
be assigned to the user group. Repeat this step to add additional policies to the user group.
Figure 18 Add User Group-Policies
8. If you want to remove a policy from the user group, select the policy name in the Selected
Policies list, and then click Remove.
9. If you want to associate remotely authenticated users with Active Directory modules, click
the Active Directory Associations tab. Check the checkbox that corresponds with each
Active Directory module you want to associate with the user group.
10. If you want to add another user group, click Apply to save this group, and then repeat the
steps in this section to add additional user groups.
11. When you have finished adding user groups, click OK. The Add User panel opens. You can
also click User Management, and then click Add User in the Guided Tasks tree view in the
left panel to open the Add User panel.
12. In the Username field, type the name that the user you want to add will use to log in to CC-
SG.
13. Check the Login Enabled checkbox if you want the user to be able to log in to CC-SG.
14. Check the Remote Authentication checkbox only if you want the user to be authenticated by
an outside server, such as TACACS+, RADIUS, LDAP, or AD. If you are using remote
authentication, a password is not required. The New Password and Retype New Password
fields will be disabled when Remote Authentication is checked.
15. In the New Password and Retype New Password fields, type the password that the user will
use to log in to CC-SG.
16. Check the Force Password Change on Next Login if you want the user to be forced to
change the assigned password the next time the user logs in.
17. Check the Force Password Change Periodically checkbox if you want to specify how often
the user will be forced to change the password.
18. In the Expiration Period (Days) field, type the number of days that the user will be able to
use the same password before being forced to change it.
19. In the Email address field, type the user’s email address.