Ldap general settings, Figure 105 ldap general settings – Raritan Computer CC-SG User Manual

Page 125

Advertising
background image

C

HAPTER

9:

C

ONFIGURING

R

EMOTE

A

UTHENTICATION

111

LDAP General Settings

1. Click the General tab.

Figure 105 LDAP General Settings

2. Type the IP address or hostname of the LDAP server in the IP Address/Hostname field. For

hostname rules, please refer to Terminology/Acronyms in Chapter 1: Introduction.

3. Type the port value in the Port field. The default port is 389.

4. Check Secure Connection for LDAP if using a secure LDAP server.

5. Check Anonymous Bind if your LDAP server allows anonymous queries. You do not need

to enter a user name and password with anonymous binding.

Note: By default, Windows 2003 does NOT allow anonymous queries. Windows 2000 servers do
allow certain anonymous operations, whose query results are based on the permissions of each
object.

6. If you are not using anonymous binding, type a username in the User name field. Type a

Distinguished Name (DN) to specify the credentials used to query the LDAP server. For DN,
enter the common name, organizational unit, and domain. For example, type
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot. Separate the
values with commas but do not use spaces before or after the comma. The value themselves
can include spaces, such as Command Center.

7. Type the password in the Password and Confirm Password fields.

8. To specify where the search for users begins, enter a Distinguished Name in Base DN. For

example, ou=Administrators,ou=TopologyManagement,o=NetscapeRoot, searches all
organizational units under the domain.

9. To narrow searching to only particular types of objects, type a value in the Filter field. For

example, (objectclass=person) will narrow searching to only person objects.

Advertising