Raritan Computer CC-SG - Manual (Page 218)

204 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
To reset the CC-SG GUI admin password:
1. Click Operation, Admin, and then click CC-SG ADMIN Password Reset.
2. Either click Reset CC-SG GUI Admin Password or press ENTER to change the admin
password back to factory default. Confirm the password reset in the next screen to
proceed.
Figure 206 Admin Password Reset for CC-SG GUI in Diagnostic Console
Resetting CC-SG Factory Configuration (Admin)
This option will reset all or parts of the CC-SG system back to their factory default values. All
active CC-SG users will be logged off without notification, and SNMP processing will stop. It is
highly recommended that CC-SG be placed in Maintenance Mode prior to initiating this
operation. If possible, reset CC-SG from within the administrator’s Director Client, rather than
from the Diagnostic Console. The Director Client Reset option can perform all functions listed
here, except for resetting Network values.
1. On the Operation menu, click Admin, and then click Factory Reset. The following
screen with seven Reset Options appears.
Figure 207 Reset CC-SG Factory Configuration