Raritan Computer CC-SG - Manual (Page 27)

C HAPTER 3: C ONFIGURING CC-SG WITH G UIDED S ETUP 13
Chapter 3: Configuring CC-SG with Guided Setup
Prepare to Configure CC-SG with Guided Setup
Before proceeding with CC-SG configuration, you must complete system configuration.
• Configure and install Dominion series and IP-Reach appliances (both serial and KVM
devices), including assigning an IP address and creating a CC-SG administrator account.
Guided Setup Overview
Guided Setup offers a simple way to complete initial CC-SG configuration tasks, once the system
configuration is complete. The Guided Setup interface leads you through the process of defining
Associations, discovering and adding devices to CC-SG, creating device groups and node groups,
creating user groups, assigning policies and privileges to user groups, and adding users. Once you
have completed Guided Setup, you can always edit your configurations individually.
Start Guided Setup:
On the Administration menu, click Guided Setup. The Guided Setup window appears. The left
panel of the window lists the Guided Tasks in a tree view. The right side of the window displays
the active task’s panel.
Figure 9 Guided Setup Window
Guided Setup is divided into 4 tasks, which are each explained in the following sections:
•
Associations —Define the categories and elements that you use to organize your equipment.
•
Device Setup —Discover devices in your network and add them to CC-SG. Configure device
ports.