Raritan Computer CC-SG - Manual (Page 29)

C HAPTER 3: C ONFIGURING CC-SG WITH G UIDED S ETUP 15
• To delete an element, select its row, and then click the Delete Row icon
to delete the
selected element from the Elements table.
5. Repeat these steps until you have added all the elements within the category to the Elements
table.
6. If you want to create another category, click Apply to save this category, and then repeat the
steps in this section to add additional categories.
7. When you have finished creating categories and elements, click OK. The Association
Summary panel displays a list of the categories and elements that you created.
8. Click Continue to start the next task, Device Setup. Follow the steps in the next section.
Device Setup
The second task of Guided Setup is Device Setup. Device Setup allows you to search for and
discover devices in your network, and add those devices to CC-SG. When adding devices you
may select one element per category to be associated with the device.
Important: Ensure that no other users are logged into the device during CC-SG
configuration.
Discover and Add Devices
1. The Discover Devices panel opens when you click Continue at the end of the Associations
task. You can also click Device Setup, and then click Discover Devices in the Guided Tasks
tree view in the left panel to open the Discover Devices panel.
Figure 11 Guided Setup -- Discover Devices
2. Type the IP address range in which you want to search for devices in the From address and
To address fields.
3. Type the subnet mask in which you want to search for devices in the Mask field.
4. In the Device types list, select the type of device you want to search for in the range
specified. Press and hold down the CONTROL key while you click device types to select
multiple device types.