Raritan Computer CC-SG - Manual (Page 219)

C HAPTER 12: A DVANCED A DMINISTRATION 205
OPTION DESCRIPTION
Full CC-SG Database Reset Selecting this option completes removes the existing CC-
SG Database and builds a new version from scratch
loading it with all the Factory Default values.
Preserve CC-SG Personality
during Reset This option is only valid and effective if the previous
option is also selected. As the CC-SG Database is being
rebuilt (in the previous option), the following values will
be migrated to the new version of the Database (if they
can be read and are available; otherwise default values
will be used). An attempt to keep the following
information is made. Default value shown in brackets.
ƒ Secure Communication [unsecured] between PC
Clients and CC-SG
ƒ Strong Password Check [off] select whether strong
password enforcement is enabled.
ƒ Direct vs. Proxy Connections [Direct] selects if direct
or proxy connections are used by PC Clients to Out-
of-Band nodes
ƒ Inactivity Timer [1800] the time before idle sessions
are logged out
ƒ Modem Setting [10.0.0.1/10.0.0.2/<none>] the setting
for the modem Server IP Address, Client IP Address,
and callback phone number.
Network Reset This option sets the networking back to Factory Defaults:
ƒ Host name = CommandCenter
ƒ Domain name = localdomain
ƒ Mode = Primary / Backup
ƒ Configuration = Static
ƒ IP Address = 192.168.0.192
ƒ Netmask = 255.255.255.0
ƒ Gateway = <none>
ƒ Primary DNS = <none>
ƒ Secondary DNS = <none>
ƒ Adapter Speed = Auto
SNMP Reset Resets SNMP configuration to Factory Defaults
ƒ Port: 161
ƒ Read-only Community: public
ƒ Read-write Community: private
ƒ System Contact, Name, Location: <empty>
ƒ SNMP Trap Configuration
ƒ SNMP Trap Destinations
Firmware Reset Removes uploaded Firmware files and restores the default
versions into filesystem repository, but does not make any
changes to CC-SG DB.
Install Firmware into CC-SG DB Loads Firmware files found in the filesystem-based
repository into the CC-SG DB.
Diagnostic Console Reset Restores the Diagnostic Console to original Factory
Configuration, Account Settings and Defaults