Raritan Computer CC-SG - Manual (Page 57)

C HAPTER 5: A DDING D EVICES AND D EVICE G ROUPS 43
3. Click the Configure button that corresponds to the serial port you want to configure. The
Configure Serial Port screen appears.
Figure 38 Configure Serial Ports Screen
4. Type a port name in Port Name field. For ease of use, name the port after the target that is
connected to the port.
5. Type a node name in the Node Name field to create a new node with an Out-of-Band
interface from this port. For ease of use, name the node after the target that is connected to
the port. This means that you will type the same name in the Port name and Node Name
fields.
6. Click the Access Application drop-down menu and select the application you want to use
when you connect to this port from the list. To allow CC-SG to automatically select the
correct application based on your browser, select Auto-Detect.
7. Click OK to add the port.