Raritan Computer CC-SG - Manual (Page 180)

166 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
2. Click Discover CommandCenters to scan and display all CC-SG appliances on the same
subset as the one you are currently using. Alternatively, you can add a CC-SG, perhaps from
a different subnet, by specifying an IP address in CommandCenter address in the bottom of
the window, and then clicking Add CommandCenter.
Figure 170 Cluster Configuration Screen
3. Type a name for this cluster in Cluster Name. If you do not provide a name now, a default
name will be provided, such as cluster192.168.51.124, when the cluster is created.
4. Click Create Cluster.
5. Click Yes when prompted if you want to continue. The CC-SG you are currently using will
become the Primary node and a default name will be provided unless you previously entered
a name in the Cluster Name field.
Figure 171 Cluster Configuration – Primary Node Set