Raritan Computer CC-SG - Manual (Page 131)

C HAPTER 9: C ONFIGURING R EMOTE A UTHENTICATION 117
RADIUS General Settings
1. Click the General tab.
Figure 110 Specifying a RADIUS Server
2. Type the IP address or hostname of the RADIUS server in the IP Address/Hostname field.
For hostname rules, please refer to Terminology/Acronyms in Chapter 1: Introduction.
3. Type the port number in the Port Number field. The default port number is 1812.
4. Type the authentication port in the Authentication Port field.
5. Type the shared key in the Shared Key and Shared key confirm fields.
6. Click OK to save the changes.
Two-Factor Authentication Using RADIUS
By using an RSA RADIUS Server that supports two-factor authentication in conjunction with an
RSA Authentication Manager, CC-SG can make use of two-factor authentication schemes with
dynamic tokens.
In such an environment, the user logs into CC-SG by first typing their username in the Username
field. Then the user types their fixed password, followed by the dynamic token value in the
Password field.
Configuration of the RADIUS server and Authentication manager to enable this is beyond the
scope of this document to provide. Configuration of CC-SG is identical to standard RADIUS
remote authentication described above. CC-SG should be configured to point at the RADIUS
server. Please refer to Appendix G: Two-Factor Authentication for additional information.