Add ldap (netscape) module to cc-sg, Figure 104 add ldap module – Raritan Computer CC-SG User Manual
Page 124
110 C
OMMAND
C
ENTER
S
ECURE
G
ATEWAY
A
DMINISTRATOR
G
UIDE
9. After you have synchronized each modules AD user groups, you should synchronize all AD
modules. Please refer to
for additional information.
Depending on your AD configuration, the synchronization process may take up to 30 seconds
per domain controller. If any domain controllers are offline during synchronization, the
process may take longer.
Note: Please refer to the following sections to familiarize yourself with how CC-SG 3.1 handles
synchronization of AD user groups:
. For instructions on generating a report containing information about AD user groups,
please refer to
Chapter 10: Generating Reports, AD User Group Report
Add LDAP (Netscape) Module to CC-SG
Once CC-SG starts and a username and password are entered, a query is forwarded either through
CC-SG or directly to the LDAP server. If the username and password match those in the LDAP
directory, the user is authenticated. The user will then be authorized against the local user groups
on the LDAP server.
1. On the Administration menu, click Security. The Security Manager screen appears,
displaying the General tab.
2. Click Add… to open the Add Module window.
Figure 104 Add LDAP Module
3. Click the Module Type drop-down menu and select LDAP from the list.
4. Type a name for the LDAP server in the Module name field.
5. Click Next to proceed. The General tab opens.