Raritan Computer CC-SG - Manual (Page 175)

C HAPTER 12: A DVANCED A DMINISTRATION 161
7. If Show terminal window was checked as described in section Configure the Call-back
Connection earlier in this chapter, then a window similar to the one below will be displayed:
Figure 166 After Dial Terminal
8. Wait 1 or 2 minutes and in a supported browser, enter the IP address of CC-SG that was
configured as the Server address under the Modem tab in Configuration Manager on CC-
SG and login to CC-SG.
Connection Mode
When connected to a node you have the option to pass data back and forth directly with that node
(Direct Mode) or to route all the data through your CC-SG unit (Proxy Mode). While Proxy
Mode increases the bandwidth load on your CC-SG server, you only need to keep the CC-SG
TCP ports (80, 443, and 2400) open in your firewall. Please refer to Raritan’s Digital Solution
Deployment Guide for additional information.
1. On the Administration menu, click Configuration. The Configuration Manager screen
appears.