Raritan Computer CC-SG - Manual (Page 152)

138 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
Backup CC-SG
Best practice is to enter Maintenance Mode before backing up CC-SG.
1. On the System Maintenance menu, click Backup. The Backup CommandCenter screen
appears.
Figure 136 Backup CommandCenter Screen
2. Type a name for this backup in the Backup Name field.
3. Optionally, type a short description for the backup in the Description field.
4. Select a Backup Type.
• Custom – Allows you to specify which components to add to the backup by checking
them in the Backup Options area below. Check each of the following to include them in
the backup.
o Data – CC-SG configuration, Device and Node configuration and User Data.
(Standard)
o Logs – Error logs and event reports stored on CC-SG
o CC-SG firmware files – Stored firmware files used for updating the CC-SG
server itself.
o Device firmware files – Stored firmware files used for updating Raritan devices
managed by CC-SG.
o Application files – Stored applications used by CC-SG to connect users to nodes.
• Full – Creates a backup of all Data, Logs, firmware and Application Files stored on CC-
SG. This produces the largest sized backup files.
• Standard – Only creates a back up of critical Data on CC-SG. This backup includes CC-
SG configuration information, Device and Node configurations and User configurations.
This produces the smallest sized backup file.
5. If you want to save a copy of this backup file to an external server, check Backup to Remote
Location.
a. Select a Protocol used to connect to the remote server, either FTP or SFTP
b. Type the IP address or hostname of the server in the Hostname field.