Quantum Data 801GC - Manual (Page 122)

5-10 Chapter 5: Making Connections Model 801GC, 801GF & 801GX¥Rev. A
Figure 5-4
Null-Modem Cable
9-pin fem. to 9-pin fem.
part #30-00124
Figure 5-4
Serial Adapter
9-pin male to 25-pin fem.
part #30-00115
Figure 5-6
Serial Adapter
9-pin male to 25-pin male
part #30-00116
Two adapters are provided for connecting the 801G*
to computers and terminals that use 25 pin D-sub
connectors for their RS-232 ports. One adapter (part
#30-00115) allows you to attach the 801G* to a 25
pin female connector port. The other (#30-00116)
adapter is for use with a 25 pin male port.
The cable and adapters that are supplied with the
801G* are shown below. No other serial cables or
adapters are available from Quantum Data at this
time. The following pages provide information on
making your own cables and adapters to meet your
specific set-up.