Quantum Data 801GC - Manual (Page 214)

6-88 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A
ASCT Analog Sync Composite Type
Classification: Format parameter setting
Command Syntax: ASCT <type>
Limits: <type>
0 = none
1 = American HDTV ORed
2 = American ORed
3 = American w/serr
4 = American w/serr & eq
5 = European HDTV ORed
6 = European ORed
7 = European w/serr
8 = European w/serr & eq
9 = American HDTV w/serr
10 = American HDTV w/serr & eq
11 = European HDTV w/serr
12 = European HDTV w/serr & eq
13 = Japanese HDTV ORed
14 = Japanese HDTV w/serr
15 = Japanese HDTV w/serr & eq
Query Syntax: ASCT?
Query Response: <type>
Description: The ASCT command sets the kind of composite sync added to
the analog video outputs when analog sync is enabled (see SSST
command) and an analog video signal is being generated (see
AVST command). The ASCT? query returns the current setting
of ASCT. A setting of zero (0) indicates that the ACS sync selection
cannot be activated by the operator.
Other Required Cmds: The SSST mode must be set to 4, 5, 6, or 7 and the AVST type
must be set to 1, 2 or 5 in order for the ASCT setting to have
any affect on the generator’s hardware outputs. The FMTU
command instructs the generator to use the new setting. The
ALLU command updates hardware to the new setting and redraws
the test image.
Example: A S C T 2 / / E n a b l e A m e r O R e d c o m p s y n c
/ / i n b u f f e r
S S S T 4 / / E n a b l e A C S
A V S T 2 / / S e l e c t a n a l o g R G B a s v i d e o
/ / t y p e
F M T U / / U p d a t e h a r d w a r e t o c u r r e n t
/ / b u f f e r c o n t e n t s