Cls clear status, Ese event status enable – Quantum Data 801GC User Manual
Page 196
6-70
Chapter 6: Programming
Model 801GC, 801GF & 801GX¥Rev. A
*CLS
Clear Status
Definition:
The *CLS command clears the Event Status Regis-
ter, the Status Byte and the output buffer.
Command Syntax:
*CLS
Example:
*CLS
Related Commands: *ESR? *STB?
*ESE
Event Status Enable
Definition:
The *ESE command sets the Event Status Enable
register to the given mask value. The bits in the
Event Status Enable register function as enable bits
for each corresponding bit in the Event Status reg-
ister. That is, when a bit in the Event Status register
goes high, and the corresponding bit in the Event
Status Enable register is a 1, it is enabled and will
cause the ESB bit in the Status Byte register to go
high.
The *ESE query returns the current value of the Event
Status Enable register.
Command Syntax:
*ESE <mask>
<mask> = 0 - 255
Example:
*ESE 8
Query Syntax:
*ESE?
Returns:
<mask><NL>
<mask> is in integer NR1 form
Example:
*ESE?
Related Commands: *CLS *ESR?