Quantum Data 801GC - Manual (Page 270)

6-144 Chapter 6: Programming Model 801GC, 801GF & 801GX¥Rev. A
IMGS IMaGe Save
Classification: Image memory management
Command Syntax: IMGS
Query Syntax: None
Description: The IMGS command saves the current contents of the generator’s
custom image edit buffer back to the memory location from
which it was originally read.
Other Required Cmds: None
Example: I M G S
IMGU IMaGe Use
Classification: Image memory management
Command Syntax: IMGU
Query Syntax: IMGU?
Query Response: <location>
Description: The IMGU command draws an image based on the current
contents of the image . The IMGU? query returns the image
memory location <location> from which the current contents of
the image were read. See the IMGR command for setting the
contents of the image.
Other Required Cmds: None
Example: I M G L B r i t e B o x / / S e l e c t t h e B r i t e B o x
/ / t e s t i m a g e
I M G U / / D r a w t h e s e l e c t e d t e s t i m a g e
INIT INITialize to factory default settings
Classification: Direct processor control
Command Syntax: INIT
Query Syntax: None
Description: The INIT command restores the contents of all of the generator’s
RAM storage locations to factory-default conditions. The generator
then goes through a complete self-test and self-calibration
procedure.
WARNING: The INIT command permanently and irreversibly
removes all user-created formats, custom images, test sequences
and directories from memory.
Other Required Cmds: None
Example: I N I T