Toshiba STRATA CIX - Manual (Page 107)

Telephone Button Programming
900 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-103
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
All ISDN Trunk Trace
Program start/stop of packaged detailed collection of event trace functions. This program is only available
in the telephone button programming mode.
Program Number(s): 905
Prerequisite Program: “Format/Unmount SmartMedia” on page 1-105 , “ISDN Trace Location” on page 1-102 ,
“ISDN Trace Location” on page 1-102 and “Event Trace Control” on page 1-100
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the PASSWORD= prompt, Enter your password and press
Hold.
At the PROG= prompt enter
905 and press Hold.
1. Press FB01 .
2. Select 1 , or 2 to turn on or off.
3. Press
Hold
twice to execute.
4. Press
# # Hold
to return to the PROG = prompt.
5. Enter another program number to continue programming or press
# # Hold
again to exit programming
mode.
Event Trace Side Change
This program enables you to manage your ISDN protocol trace. This program is only available in the
telephone button programming mode.
Program Number(s): 906
Prerequisite Program:
“Format/Unmount SmartMedia” on page 1-105
Reference: Install SmartMedia card
Access Sequence: Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the
PASSWORD= prompt, Enter your password and press
Hold.
At the PROG= prompt enter
906 and press Hold.
1. Press
FB01
.
2. Select 1 , 2 , or 3 to select parameter.
3. Press Hold to execute.
4. Press
# # Hold
to return to the PROG = prompt.
5. Enter another program number to continue programming or press
# # Hold
again to exit programming
mode.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
FB Name FB Summary Value LCD Prompt
Trace All ISDN
Trunks 01
Output All ISDN Trunk Events to
SmartMedia.
1:On (default)
2:Off
1:ON
2:OFF
FB Name FB Summary Value LCD Prompt
Side Change 01
Enter desired parameter number.
1:Message
2:ISDN
3:Message+ISDN
1:MESSAGE
2:ISDN
3:MESSAGE+ISDN