Toshiba STRATA CIX - Manual (Page 126)

System Error Codes
Station Programming Error Codes
2-10
Strata CIX/CTX Telephone Button Programming 11/04
213
82 -
The additional information assigned to the Feature Button is
invalid.
82 - 120 The line number entered does not exist.
96 -
110
130
140 The allowable number of GCO, POOL or PhDn has been
exceeded.
98 -
The quantity of Flexible buttons programmed exceeds the
system's capacity.
214
33 FB01~FB08 The equipment number entered is out of the range.
49 - The designated circuit is already in use.
50 -
Multiple DSSs cannot be assigned to the same Shelf/Slot/
Circuit.
51 -
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52 - The entered value conflicts with an existing numbering plan.
80 FB00 The designated Prime DN does not exist in the system.
80 FB01~FB08
The designated PCB and extension combination is not
allowed.
96 FB01~FB08
The number of DSS consoles entered exceeds the system's
capacity.
98 -
The number of DSS buttons entered exceeds the system's
capacity. This error can occur with PB1~PB8
215 33 - The add-on module number is out of the range.
33 FB01
100
110
120
130
140 The sub-parameters for Key Number field must be assigned.
33 - 120
The line number entered is out of range for the system's
capacity.
33 - 130 The GCO key group/index entered is out of the range.
33 - 140 The POOL group entered is out of the range.
33 - 530 The BGM number entered is out of the range.
33 - 540 The door lock number entered is out of the range.
33 - 900 The application number entered is out of the range.
48 - Essential sub-parameter values must be entered.
49 FB01 110
Two or more PhDNs with the same value are registered to one
extension.
Program Code FB
Sub-
parameter
Error Descriptions