Toshiba STRATA CIX - Manual (Page 72)

Telephone Button Programming
300 Series Programs
1-68
Strata CIX/CTX Telephone Button Programming 11/04
Table 1-31 Programs 318~320
Button Sequence Value(s) Summary
318 DID Intercept
Assignment
318 , Hold
This command assigns the DID Routing table when DID numbers are
undefined or not received.
318-00 ILG Number
n, Hold
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter ILG number.
318-01 Type
FB01 , n, Hold
n = 1. No DID
2. Not Determined
Select Routing Type.
318-02 MOH Source
FB02 , n, Hold
n = 1. Quiet Tone
2. External 1 (default)
3. External 2
4. External 3
5. External 4
6. External 5
7. External 6
8. External 7
9. External 8
10. External 9
11. External 10
12. External 11
13. External 12
14. External 13
15. External 14
16. External 15
Select Music On Hold
318-03 GCO Destination
FB03 , n, Hold
0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) GCO Key Group number.
318-04 Pooled Line Group
FB04 , n, Hold
0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) POOL Line Key Group Number.
318-
05~07 Audio Day1/Day2/
Night Dst Type
FB05 ~ FB07 , n, Spkr
n = 1. No Data (default)
2. Dialing Digits
3. DISA
4. Built-in modem
5. Night Bell
Select the Audio/Speech call Day1 destination type.
• No Data ñ no destination will ring when the line rings into the
system.
• Dialing Digits ñ assigns the line to ring the directory number or
access code defined in the ìDestination Digitsî assignment
• DISA ñ assigns the line to ring in as a DISA call. DISA dial tone
will be returned to the caller.
• Modem ñ assigns the line to ring the remote maintenance modem
on the CTX processor. Used to call into the system with a CTX
WinAdmin PC and modem.
• Night Bell ñ Assigns the line to cause the night relay to pulse
(one-sec.close/3-sec.open)
Audio Day1/Day2/
Night Dst DN
n1, Hold
n1 = Up to 32 digits Enter the Destination Directory Number. Destination DN is only
required if the destination type is ìDialing Digitsî