Toshiba STRATA CIX - Manual (Page 48)

Telephone Button Programming
200 Series Programs
1-44
Strata CIX/CTX Telephone Button Programming 11/04
Program 207
Note Use Program 207 only for CTX software versions R1.03 and above.
Assign the Feature button as a One Touch button using the following programs before using Program 207.
• Use Program 205 to assign DKT’s feature button as a One Touch button
• Use Program 213 to assign the Add-on Module feature button as a One Touch button
• Use Program 215 to assign DSS Console feature button as a One Touch button
206-03 Handsfree
Answerback
FB03 , n, Hold
n = 1. Enable (default)
2. Disable
Whether to regard an incoming call as a hands free call
206-04 Display DN
FB04 , n, Hold
n = Up to 5 digits Enter the number displayed on the calling telephone that rings this
Phantom DN number.
This number is overridden by the number in Program 209, FB04 (if
assigned) and if the Phantom DN is in a hunt group. When calling
from this Phantom DN, the number displayed on the called telephone
appears in order of priority as follows:
This number in Program 209, FB04 (if assigned) and if the PhDN is in
a hunt group.
Ö or this number in Program 200, FB15 (if assigned).
Ö or the calling telephone's PDN.
206-05 System Call Forward
FB05 , n, Hold
n = 0~4 (CTX100)
0~10 (CTX670 Basic)
0~32 (CTX670 Exp.)
(default = 0) Select the System Call Forward value.
206-06 VM ID Code
FB06 , n, Hold
n = Up to 16 digits Enter the voice mail box number that should answer calls when this
PhDN calls voice mail; or, when this PhDN is called and then forwards
to voice mail (This number is prefixed by codes in Program 579,
FB11
~
FB16
).
This VMID code is sent to the voice mail device in SMDI packets or
DTMF tones on direct calls to voice mail from the PhDN; and on calls
to the PhDN that forward to voice mail (see Program 580 for SMDI or
DTMF choice).
Note Do not enter a VMID code in this field if this PhDN is
associated with a PDN in a multiple DN hunt group (Program
209,
FB06
).
The associated PDNís VMID code (Program 200,
FB19
) will be sent
to voice mail.
206-09 Message Center
FB09 , n, Hold
n = Up to 16 digits Enter the Message Waiting Center DN, VM Pilot Number or lowest
member of VM hunt group.
206-11 Display Name
FB11 , n, Hold , Hold
n = Up to 16 digits Select radio button for user name to be included in the list display of
Large LCD (Directory Assistance).
Button Sequence Value(s) Summary
207 Single Touch Button
Data Assignments
207 , Hold
Assigns timing parameters to Primary DNS.
207-00 Primary DN
n, Hold
n = Up to 5 digits Enter Primary DN of DKT.
207-01 Feature Key Number
FB01 , n, Hold
n = 1~2860 Enter the feature number of the one touch button that registers the
operating data.
Table 1-23 Programs 206 (continued)
Button Sequence Value(s) Summary