Toshiba STRATA CIX - Manual (Page 129)

System Error Codes
Trunk Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-13
Sy
stem
Er
ro
r
C
odes
Trunk Programming Error Codes
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions
300
33 FB01 The equipment number entered is out of the range.
33 FB02 The ILG entered is out of the range.
33 FB03 The OLG entered is out of the range.
33 FB12 The hunting order entered is out of the range.
49 FB01
When modifying previously assigned equipment:
• The designated PCB Type does not allow CO trunk
assignments.
• The designated circuit does not allow CO trunk
assignments.
49 FB02
The ISDN ILG number is designated for analog trunks or the
entered ILG number does not exist in the system.
49 FB02 м0о was entered in ILG when OLG was not registered.
49 FB02 The OLG entered is not registered in the system.
49 FB03
The ISDN OLG number is designated for analog trunks or the
entered OLG number does not exist in the system.
49 FB03 м0о was entered in OLG when ILG was not registered.
49
FB02
FB03 A conflict exists between the ILG number and the OLG
number trunk type.
54 FB00
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
80 FB00
A trunk number that does not exist in the system has been
selected.
80 FB02 The entered ILG number does not exist in the system.
80 FB03 The entered OLG number does not exist in the system.
96 FB00 Allowable number of trunks has been exceeded.
96 FB00 The line number entered exceeds the system's capacity.
301
33 FB01 The trunk number entered is out of the range.
80
A trunk number that does not exist in the system has been
selected.