Toshiba STRATA CIX - Manual (Page 109)

Telephone Button Programming
900 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-105
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
Format/Unmount SmartMedia
This program enables Administrators to format a SmartMedia card from Strata CTX WinAdmin or the
telephone button pad.
Note Strata CTX WinAdmin cannot view SmartMedia files directly. Additional hardware is required to view
the contents of the SmartMedia card.
Program Number(s): 908
Prerequisite Program: None
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the PASSWORD= prompt, Enter your password and press
Hold.
At the PROG= prompt enter
908 and press Hold
.
1. Press FB01 to enter parameter. Enter 1 ~ 4 as your command choice. Press the Scroll or Page button
to make your selection.
2. Press
Hold
to confirm and
Hold
again to execute.
3. Wait for the PROG = prompt to appear before proceeding.
4. Enter another program number to continue programming or press
# # Hold
again to exit programming
mode.
Strata CTX SmartMedia Directories
Running the Normal and Forced options of this program creates five directories on the SmartMedia card as
follows:
• Admlog – The Admlog folder saves
• Errlog – System error logs are saved into this folder.
• Evnttrce – Strata CTX WinAdmin Event Trace files are saved into this folder.
• Progdata – Your Strata CTX programmed settings are all saved in this folder.
• Program – The operating software and default data of the Strata CTX is saved in this folder.
When a backup is performed, Strata CTX saves programmed data to the Progdata folder.
FB Name FB Summary Value LCD Prompt
Control 01 Choose SmartMedia card formatting method:
Normal ñ creates any Strata CTX SmartMedia
directory that does not exist already. Exiting
directories are not overwritten by this procedure.
Forced ñ erases any existing directories and files.
All existing data is overwritten. See Strata CTX
SmartMedia Directories for more information.
Unmount ñ writes data into SmartMedia Card.
Always run unmount before removing the
SmartMedia card to prevent damage to the card.
Transfer ñ writes data from static RAM to
SmartMedia Card.
1:Normal
2:Forced
3:Unmount
4:Transfer
1:NORMAL
2:FORCED
3:UNMOUNT
4:TRANSFER