Toshiba STRATA CIX - Manual (Page 11)

Telephone Button Programming
Button Programming Procedure
Strata CIX/CTX Telephone Button Programming 11/04
1-7
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
7. Press FB04 . Press 60 to set the Hold Recall Timer and press Hold .
8. Press FB05 . Press 15 to set the First Interdigit Timer and press Hold .
9. Press FB06 . Press 5 to set the Second Interdigit Timer and press Hold .
10.Press FB07 . Press 32 to set the Ring Transfer No Answer Timer and press Hold twice.
11. Press ##Hold to return to the PROG= prompt.
Now that you are more familiar with the Strata CTX button programming interface, begin programming your
Strata CTX system starting with Step 1 below.
Button Programming Procedure
Step 1: Enter Program Mode
Enter the button sequence displayed below to enter the CTX670 programming interface from a DKT
station.
1. Log in by pressing: Hold ✱#✱#1✱2✱3✱ .
2. At the PASSWORD= prompt, enter your password. Default is 0000 .
3. Press Hold .
Step 2: Enter Program Number
1. At the PROG= prompt enter the three digit program code (e.g., 200 ) and press Hold .
2. Programmable parameters are identified by the FB LEDs that are illuminated on the DKT. Go to
ìChoose a Button Sequenceî on page 1-7 Press on the related
FBnn
button to program a parameter.
… or if there are no illuminated FB LEDs, continue to Step 3.
Step 3: Enter FB00 Parameters
FB00 parameters designate a specific station, trunk, or circuit to be programmed. The FB00 prompt (e.g.,
EQUIP= , DN= , INDEX= , etc.) appears automatically in the LCD screen.
1. At the FB00 prompt, enter the desired value using the telephone number pad.
2. Press Hold .
Step 4: Choose a Button Sequence
➤ Select the button sequences based on the programs required for programming the Strata CTX from the
Telephone. For 100~900 series programs, refer to pages
11 ~ 97 .
Program Listings
This table is a list of programs found in this chapter.
Program
Number
Program Name
100 Card Slot Assignment
102 Flexible Access Codes
103 Class of Service
104 System Timers
105 System Parameters
106 Day/Night Mode Day of Week Mapping