Toshiba STRATA CIX - Manual (Page 141)

System Error Codes
Service Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-25
Sy
stem
Er
ro
r
C
odes
540
48 FB01
An incoming destination number must be entered when After
Shift Type field is set to Dialing Digits.
51 FB00 The entered value conflicts with an existing number scheme.
52 FB00
The entered DN conflicts with an existing DKT, ISDN
extension, etc.
80 FB00 The entered DN does not exist.
541
20 FB01
A character(s) that is not permitted is included in the specified
code.
52 -
The entered DN conflicts with an existing DKT, ISDN
extension, etc.
80 - The entered DN does not exist.
550
33 FB01~FB08 The OLG entered is out of the range.
49 FB01~FB08
Two or more OLG numbers with the same value exist in the
same group.
80 FB01~FB08 The entered OLG number does not exist.
551 32 FB01~FB03 The value entered is not permitted.
570
49 FB01
Registered Digit Length cannot be less than the Verified Digit
Length.
50 FB02
Registered Digit Length cannot be less than the Verified Digit
Length.
571
49 FB01~FB04 The same account code cannot be repeated.
50 FB01~FB04 The same account code cannot be repeated.
573
33 FB01~FB08 The door phone number entered is out of the range.
80 FB01 The entered Door Phone does not exist.
576
33 FB00 The tenant number entered is not м1о.
33 FB01 The paging group number entered is out of the range.
80 FB01 The entered Paging Group does not exist.
577
33 FB00 The entered circuit type is out of range.
33 FB00 The Ckt Type number entered, CO, GCO or POOL is invalid.
51 FB00 The entered circuit number is invalid.
52 FB00 The entered circuit number is invalid.
80 FB00
The Device installed in the Circuit does not existed in the
system.
80 FB01 The entered station number does not exist.
579 - - No error occurs for this Program except for common errors.
580
52 - The entered DN is not a VM extension.
80 - No error occurs for this command except for common errors.
Program Code Occurred FB
Sub-
parameter
Error Descriptions