Toshiba STRATA CIX - Manual (Page 112)

Telephone Button Programming
900 Series Programs
1-108
Strata CIX/CTX Telephone Button Programming 11/04
Program Update
This program enables you to update the Strata CTX programs.
Program Number(s): 911
Prerequisite Program: Format SmartMedia Card
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the
PASSWORD= prompt, Enter your password and press
Hold.
At the PROG= prompt enter
911 and press Hold.
Note Before running this program, make sure the SmartMedia card is properly formatted. See ìFormat/
Unmount SmartMediaî on page 1-105 for more details.
1. Press FB01 to enter your Backup choice. Press the Scroll or Page button to view your selection
options.
2. Press
1
.
FB01
and
FB04
should blink green.
3. Press
Hold
to execute. Press
Hold
again to Cancel. This program stops running if you exit
programming mode from your telephone.
Make Busy Control
When an error occurs in hardware resources used for a station or a line fails, this feature makes them
busy. The station or line PCB can be disabled temporarily to perform maintenance or parts replacements
as well. This program is only available in the telephone button programming mode.
FB Name FB Summary Value LCD Prompt
Update Function 01 Enter 1 or 2 to identify the type of Update
intended.
Select 3 to cancel a running update.
1:Update
2:Reboot
3:Cancel
1:Update
2:Reboot
3:Cancel
Total Blocks 02 View total blocks to be updated (total blocks
will vary depending on software versions). 0~65536 (CTX670)
0~128 (CTX100)
default = 0 n/a
Copied Blocks 03 View number of blocks copied. 0~65536 (CTX670)
0~128 (CTX100)
default = 0 n/a
Active Side Status 04 Backup Type Display 1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error 1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
Stand by Side Status 05 Stand by Backup Type 1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error 1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
Active Side Number 06 Active Side Number. 0 or 1
default = 0 ACT SIDE=
Status 07 View Backup Status. 1:Idle
2:Running
3:Success
4:Error 1:Idle
2:Running
3:Success
4:Error