Toshiba STRATA CIX - Manual (Page 122)

System Error Codes
Station Programming Error Codes
2-6
Strata CIX/CTX Telephone Button Programming 11/04
202
52 FB26~FB32
The additional ISDN extension number cannot be registered.
The number is already in use by a DKT extensions, etc.
54 FB00
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
80 FB00 The DN entered is invalid.
80 FB01
A PCB without ISDN extension settings allowed' is designated
for the PCB connecting the ISDN extension(s) selected.
96 FB02
The number of channel group exceeds the system capacity
when ISDN station is registered.
96 FB00
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
98 FB35
The quantity of station speed dial bins entered exceeds the
system's capacity.
203
33 FB01 The new DN is not assigned.
49 FB01
The new DN value conflicts with an existing value DN, PhDN,
etc.
51 -
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51 FB01
The new DN value conflicts with an existing numbering
scheme value.
52 FB00 The new DN value conflicts with existing group extensions.
80 FB00 The new DN value does not exist.
204
33 FB17 The Call History memory size entered is wrong.
49 FB01
The number of attendant consoles exceed the number
specified in the system.
52 FB00 DKT is not assigned to DN (ISDN, etc.).
80 FB00 The DN entered is an extension number that does not exist.
98 FB04 Allowable Feature Button number is exceeded.
98 FB17 Allowable Call History Memory size is exceeded.
205
33 FB01
100
110
120
130
140 Sub-parameters must be assigned.
33
120 The line number entered is out of range for the system's
capacity.
33 130 The GCO key group/index entered is out of the range.
33 140 The POOL group entered is out of the range.
33 530 The BGM number entered is out of the range.
Program Code FB
Sub-
parameter
Error Descriptions