Toshiba STRATA CIX - Manual (Page 121)

System Error Codes
Station Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-5
Sy
stem
Er
ro
r
C
odes
Station Programming Error Codes
Program Code FB
Sub-
parameter
Error Descriptions
200
33 FB01 The entered Shelf/Slot/Circuit value is out of range.
33 FB12 The entered System Call Forward index is out of the range.
49 FB01
The selected PDN(s) conflicts with an existing PDN(s)
assignments for the selected circuit.
49 FB02 Station Type cannot be changed.
49
FB15
FB22 The desired DN does not exist.
51 FB00
The entered value conflicts with an existing numbering
scheme.
52 FB00
The entered value conflicts with an existing ISDN assignment
etc.
54 FB00
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
80 FB00 The DN does not exist.
80 FB01
A PCB without ìDKT/SLT setting allowedî is designated for a
PCB connecting the selected ISDN extensions.
96 FB00 The allowed number of extensions has been exceeded.
98 FB35
The quantity of station speed dial bins entered exceeds the
system's capacity.
201
50 -
The DN entered is the DN that is used as the administration
terminal.
FB which this error occur : FB01
51 FB01 The entered number is not the extension number.
52 FB01 The entered number is not the extension number.
80 FB01 The entered value is not a valid extension.
202
33 FB01 The equipment number entered is out of the range.
49 FB01
PCB assignment is not set for the ISDN card connecting
selected extensions.
49 FB01 The entered equipment is using as other ISDN extension.
49 FB02 An ISDN trunk channel group conflict has been detected.
49 FB02
Although the P-P connection was selected, an additional DN
is registered.
49 FB26~FB32 The desired value conflicts with existing ISDN extensions.
51 -
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
FB00, FB26
~FB32
The desired value conflicts with existing number schemes.
52 FB00 A DN used for DKT extensions is designated.