Toshiba STRATA CIX - Manual (Page 133)

System Error Codes
Trunk Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-17
Sy
stem
Er
ro
r
C
odes
315
FB01
FB02
FB04
FB05
ìNONEî entered in any field is invalid.
33 FB03 The entered equipment value is invalid.
49 FB00
The PCB installed in the designated Shelf/Slot must be a
RDTU.
316
33 FB01 The channel group entered is out of the range.
33 FB01 RPTU Equipment Number entered is invalid.
49 FB01
When the equipment is moved, the number of the PCM
highway in the moved equipment is different from the current
equipment.
49 FB04
If the Span Interface speed is set to a value not equal to 1.5M,
the Dch position is modified.
52 FB00
The entered channel group number conflicts with an existing
ISDN extension(s).
54 FB01 The equipment number entered is out of range.
80 FB00
The entered channel group number does not exist in the
system.
80 FB01 The entered circuit must be an assigned ISDN.
317
33 FB00 The entered equipment value is invalid.
33 FB03 The ILG entered is out of the range.
33 FB04 The OLG entered is out of the range.
49 FB03 м0о was entered in ILG when OLG was not registered.
49
FB03
FB04 The entered ILG/OLG values do not have ISDN assignments.
49 FB04 The OLG entered is not registered in the system.
49 FB04 м0о was entered in OLG when ILG was unregistered.
50 FB18
The T-Wait Timer can only be enabled if the Protocol is set to
National ISDN.
52 FB00
The entered channel group number conflicts with an existing
ISDN extension(s).
54 FB00
The quantity of lines, ISDN channels and PDNs entered
exceeds the number of ports licensed with this processor.
80 FB00
The entered channel group number does not exist in the
system.
80 FB01 The entered circuit must be an assigned ISDN.
80 FB03 The entered ILG number does not exist in the system.
80 FB04 The entered OLG number does not exist in the system.
96 FB00
The allowable channel group assignments exceed the system
capacity.
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions