Toshiba STRATA CIX User Manual
Page 119
System Error Codes
System Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-3
Sy
stem
Er
ro
r
C
odes
104
-
-
See
105
33
FB21~FB22
The entered Clock value is out of range.
33
FB13
The Paging Group No. entered is out of the range.
49
FB12
FB18
The BIOU general relay number value conflicts with existing
parameter assignments.
49
FB21~FB22
The entered circuit number is not the clock source port.
80
FB12
The Paging Group No. entered does not exist in the system.
106
-
-
See
107
33
FB00~FB01
The entered Pad device number is invalid.
96
FB01~FB02
The number of Pad groups exceed the system capacity.
108
33
FB00
The entered Device Type is out of range.
33
FB01
The PAD group entered is out of the range.
80
FB00
The Device number entered does not exist in the system.
109
33
FB08~FB16
The entered equipment is out of range.
49
FB08~FB16
The equipment which the card type was assigned was not
entered.
50
FB08~FB16
The entered equipment is registered as MOH already.
80
FB01~FB07
A BIOU circuit with other data such as door phone, etc. is
assigned in MOH/BGM 1~7.
80
FB08~FB16
A circuit with a non-STU circuit is designated in MOH/BGM
8~16.
110
16
-
Identification error: A super user password cannot be checked
if you are logged in with a general user level password.
111
-
-
See
112
33
FB00
The entered date is out of range.
98
-
Allowable number of Working Day Type has been exceeded.
113
33
FB01~FB09
The entered time value is out of range.
114
-
-
See
115
-
-
See
116
33
FB01
The Program Number entered is invalid.
117
32
FB00
An invalid character exists in the entered value.
51
FB00
The inputted analysis number is using in a part of the other
analysis number.
118
FB01
Incorrect Master ID code.
119
-
Common error. See Common Error Code table.
150
32
FB09
Incorrect value. The values should be numerals only.
Program
Code
FB
Sub-
parameter
Error Descriptions