Toshiba STRATA CIX - Manual (Page 86)

Telephone Button Programming
500 Series Programs
1-82
Strata CIX/CTX Telephone Button Programming 11/04
517 Multiple Calling Group
Assignment
517 , Hold
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
517-00 Multiple Call Group
Number
n, Hold
n = 1~16 (CTX100),
1~32 (CTX670 Basic)
1~64 (CTX670 Exp.) Select a group number.
517-01 MC Group Pilot
Number
FB01 , n, Hold
n = 1~5 digits Enter the Pilot Directory Number that should be assigned to the
Multiple Call Group. This can be any number 1~5 digits that does not
conflict with numbers in the current system Number Plan.
517-02 Ring Delay 1 Timer
FB02 , n, Hold
n = 1~180 Set the timer in seconds.
517-03 Ring Delay 2 Timer
FB03 , n, Hold
n = 1~180 Set the timer in seconds.
517-04 System Call Forward
FB04 , n, Hold
n = 0~32 Assign a System Call Forward template number to the multiple calling
group. Enter 0 or 1~32.
517-05 Voice Mail ID
FB05 , n, Hold , Hold
n = Up to 10 digits Enter the VM call forward ID digits for the multiple calling group
518 Multiple Calling
Members Assignment
518 , Hold
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
This program assigns members to a group.
518-01 Multiple Calling Group
Index
FB01 , n, Hold
n = 1~16 (CTX100), 1~32
(CTX670 Basic) and 1~64
(CTX670 Exp.) Enter a group number.
518-02 Member Index
Number
FB02 , n, Hold
n = Up to 32 digits Enter the DN of the extension you wish to add.
518-03 Member Type
FB03 , n, Hold
n = No Data
Dialing Digits Enter Dialing Digits to make the extension ring.
518-04 Member DN
FB04 , n, Hold
n = Up to 32 digits Enter the DN of the extension you wish to add.
518-05 Ringing Options
FB05 , n, Hold , Hold
n = Immediate
Delay 1
Delay 2 Select either: Immediate, Delay 1 or Delay 2.
519 Delete Multiple
Calling Group Index
519 , Hold
This program deletes multiple calling group.
519-01 Delete 1~16 (CTX100),
1~32 (CTX670 Basic)
1~64 (CTX670 Exp.) Enter the multiple ringing group index number
520 LCR Local Route Plan
Assignment
520 , Hold
There are 64 LCR route plans. This assignment is used to select
which LCR route plan should be used to route local calls. The Local
Route Plan, which must be defined in the route definition assignment,
determines which CO line group is used for local outgoing calls.
520-01 Local Area Code
FB01 , n, Hold
n = 3 digits Enter the area code for the dialing area in which the system is
installed. This is the area code for the Central Office (CO) that
provides local CO lines to the system. If no data is entered in this
field, any previously programmed data is lost.
520-02 Local Route Plan
FB02 , n, Hold , Hold
n = 1~64
(default = 1) Enter the LCR Route Plan number that should be used to route local
calls. Local calls are made by dialing 7-digit public telephone numbers
that do not require an Area Code. There are 64 LCR Route Plans
from which to choose.
Table 1-35 Programs 500~577 (continued)
Button Sequence Value(s) Summary