Toshiba STRATA CIX - Manual (Page 31)

Telephone Button Programming
100 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-27
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
120 Tenant Data
Assignment
120 , Hold
This program enables you to select an Attendant or Night Bell to ring
when dialing 0 in Day 1, Day 2 or Day 3 mode for up to eight different
Tenants. You can also assign the general purpose relay to the Night
Bell in this program.
120-00 Tenant Number
n, Hold ,
n = 1~8. No Data (Default) Select the Tenant number for which the daily schedules will be
configured.
120-01,
120-02,
120-03 Dial 0 Call Day 1, 2, or
3 Dst Type
FB01 , n=1 or 3, Hold
or (see next row)
n = 1. No Data (default)
2. Dialing Digits (see
оn=2о below)
3. Night Bell
Select to call an Attendant or select to ring the Night Bell when dialing
the Tenant Attendant Access Code in the Day1, Day 2, or Day 3 mode
for this Tenant.
The Tenant Attendant Access Code must be assigned in Prg 102. If it
should be м0,о the Attendant Console Group Access Code, which is
м0,о must be deleted.
FB01 , n= 2 (Dialing
Digits), Spkr .
DEST=enter values.
Hold
DEST
= Up to 32 digits for each
Day Mode selected
(default = noData) Enter the PDN of the Attendant (BATI) to ring when dialing Tenant
Attendant Access Code in Day, Day2, or Day 3 mode.
120-04 Night Mode Relay
FB04 , n, Hold
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5 Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay continuously
when the system is in the night mode.
120-05 Night Bell Relay
FB05 , n, Hold
n = BIOU 1 = relay 1~4
BIOU 2 = relays 5~8
ACTU = relay 5 Enter the General Purpose relay number assigned to the Night Bell.
BIOU relays 1~8. This operation activates the relay when a CO line or
DID rings when the system is in night mode. The CO or DID line must
be assigned to ring the night bell.
Table 1-13 Program 117
Button Sequence Value(s) Summary