Tektronix AWG610 - Manual (Page 102)

Tutorials
2-64
AWG610 Arbitrary Waveform Generator User Manual
2. Move the left cursor to position 2808 by pushing the 2, 8, 0, 8, and ENTER
buttons.
If you have an external keyboard connected, just type the numbers and press
the Return key.
3. Push the TOGGLE button on the front-panel to change the active cursor.
4. Confirm that the right cursor is now active by checking the following:
H The R field is now highlighted.
H The right cursor changed to a solid line.
H The left cursor changed to a dashed line.
5. Move the right cursor to position 5461 by pushing the 5, 4, 6, 1, and
ENTER buttons.
If you have an external keyboard connected, just type the numbers and press
the Return key.
Do the following to change the amplitude within the region specified by the area
cursor:
Turn the LEVEL/SCALE knob clockwise to change the waveform
amplitude to 0.5 V. The waveform should look like the one shown in
Figure 2–41.
Figure 2-41: Waveform edit in quick editor