Tektronix AWG610 - Manual (Page 356)

Appendix A: Specifications
A-10
AWG610 Arbitrary Waveform Generator User Manual
Table A-13: AC line power
Characteristics Description
Rating voltage 100 VAC to 240 VAC
Voltage range 90 VAC to 250 VAC
Frequency range 48.0 Hz to 63 Hz
Maximum consumption 400 W
Maximum current 5 A
Fuse rating 10 A fast, 250 V, UL 198G (3 AG)
5 A (T), 250 V, IEC 127
Table A-14: Timer
Characteristics Description
Timer
Operation life 6 years
Type Li 3 V, 190 mAh
Table A-15: Interface connectors
Characteristics Description
GPIB 24Ćpin, IEEE 488.1 connector on the rear panel
Ethernet 10 BASEĆT, RJĆ45 connector on the rear panel
Keyboard connector 6Ćpin, miniĆDIN connector on the rear panel
Table A-16: Installation requirement
Characteristics Description
Heat dissipation
Maximum power 400 W (maximum line current: 5 A
rms
, at 50 Hz)
Surge current 30 A (25 _C) peak for equal to or less than 5 line cycles,
after the instrument has been turned off for at least 30s
Cooling clearance Bottom 2 cm (0.8 in)
NOTE: The feet on the bottom provide the required
clearance when set on a flat surface.
Sides 15 cm (6 in)
Rear 7.5 cm (3 in)