Tektronix AWG610 - Manual (Page 34)

Getting Started
1-10
AWG610 Arbitrary Waveform Generator User Manual
Table 1-6: Power cord identification
Plug configuration Normal usage Option number
North America Standard
Europe A1
United Kingdom A2
Australia A3
North America A4
Switzerland A5
Push the PRINCIPAL POWER SWITCH (shown in Figure 1–1) on the rear
panel of the instrument. Power is now applied to the instrument standby
circuitry. Once the instrument is installed, leave the PRINCIPAL POWER
SWITCH on and use the ON/STBY switch, located on the front-panel, to turn
the instrument on and off.
Standby Power