Tektronix AWG610 - Manual (Page 355)

Appendix A: Specifications
AWG610 Arbitrary Waveform Generator User Manual
A-9
Table A-11: Auxiliary inputs (Cont.)
Characteristics PV reference page Description
Event trigger input
Connector 9Ćpin, D type on the rear panel
Number of events 4 bits
Input signal 4 event bits and Strobe
Threshold TTL level
Impedance 2.2 kW, pullĆup to +5 V
Pulse width Minimum 128 clocks
Input voltage range 0 V to +5 V (DC + peak AC)
Delay to analog out,
Typical
850 clock +20 nsĂĂ(JumpĂtimingĂ:ĂASYNC)
Reference 10 MHz clock input
Input voltage range 0.2 V to 3.0 V
pĆp
(into a 50 W load, AC coupling)
Maximum "10 V
Impedance 50 W, AC coupling
Reference frequency
10 MHz "0.1 MHz
Connector Rear panel BNC connector
5 The characteristics are specified at the end of the BNC cable (012Ć0482Ć00).
Table A-12: Display and timer
Characteristics Description
Display
Display area Horizontal: 13.2 cm (5.2 in)
Vertical: 9.9 cm (3.9 in)
Resolution
640 (H) 480 (V) pixels