Tektronix AWG610 - Manual (Page 268)

The UTILITY Window
3-150
AWG610 Arbitrary Waveform Generator User Manual
You can use the PC keyboard for menu operations rather than using the
instrument front panel keys or buttons. Use the keyboard to input the file name,
directory name, and text in the Text/Equation editors. The PC keyboard character
keys, ten keys, arrow keys, space key and shift key can be used in place of the
front panel keys, buttons, and some menu operation commands. Table 3–43 lists
other edit operations you can perform from the PC keyboard.
Table 3-43: External keyboard edit operations
Control keys Descriptions
Character and
numeric keys
Characters found in the character palette can be input from the
corresponding keys on the keyboard.
a and ' keys Corresponds to the frontĆpanel a and ' keys. The caret moves
horizontally when using the equation editor.
y and b keys Corresponds to the frontĆpanel y and b keys. The caret moves
vertically when using the equation editor.
Delete Deletes a character to the right of the caret.
Backspace Deletes a character to the left of the cursor.
CtrlĆC Copy
CtrlĆX Cut
CtrlĆV Paste
CtrlĆZ Undo
CtrlĆS Toggles the selection on and off.
Setting General Purpose Knob Direction
Use the general purpose knob to highlight items in the pop-up menu or file list.
The default setting for the knob rotation is clockwise for up (forward) and
counterclockwise for down (backwards).
H Turning the knob clockwise causes the highlight bar to move up.
H Turning the knob counterclockwise causes the highlight bar to move down.
You can change the default setting for the general purpose knob by following the
steps below:
1. Push the UTILITY (front-panel)
!System (bottom).
2. Select Knob Direction by using the
y and b buttons.
3. Select Forward or Backward using the general purpose knob.
The changes take affect immediately.
About Key Operation