Tektronix AWG610 - Manual (Page 190)

The Graphical Waveform Editor
3-72
AWG610 Arbitrary Waveform Generator User Manual
XY View Dialog Box.
Figure 3-11: XY View dialog box
Table 3-19: XY View dialog box parameters
Parameters Descriptions
X Axis Specifies the waveform you want to assign to the X axis.
Y Axis Specifies the waveform you want to assign to the Y axis.
Do the following steps to view two waveforms in an XY display:
1. Make sure that two or more windows are currently open.
2. Push Tools (bottom)
!XY View... (pop-up)!OK (side).
The XY View dialog box appears.
3. Select the window waveform to use for the X axis.
4. Select the window waveform to use for the Y axis.
5. Push the Display side button to display the two specified waveforms in the
XY view.
6. Push the Close side button to close the dialog box.